7 Problems and its solution for Interlocking paver blocks in India

paver blocks in india

 

JR Rubber Industries are the leading producers of rubber paver blocks in india and spread their name in Africa for pavement and tile production, The company with 25 years of success is the prime choice for interlocking paver mould creation and paver plant installations along with onsite or online trainings

Along with paver productions support, we also care for the maintenance of the pavers and here are some of the tips that will help to take care of concrete pavers and its regularly reported issues.

We often see that pavers at footpath, compounds and even at home surrounding that many pavers are either broken or uneven. It often causes some disturbance to many passengers or ourselves when we walk over or near to it. However, We often neglect it because this issue might not under us to solve or we don’t know what to do. Hence, we are providing you with the solution to a few problems that usually occur during the lifespan of pavers. These solutions can be used at your paver filled compounds.

Here are the problems and solutions for the paver issues.

rubber paver mould manufacturers

  1. Uneven size and height of pavers

We often find uneven pavers at public places which is not so comfortable to walk by. However, the reason behind this problem in the base itself. The base may not be filled properly or the mixer had an uneven thickness. If the site has clay soil, then it will hold a lot of water than soil.

The existence of more water in the soil will make way to displace the original position of pavers. During the winter time when the ground freeze, the soil will expand more and push the paver up. However, when the soil comes back to normal position, The pavers may stay at the same high since they cannot move down without a good amount of force from the other side.

Solution: Unfortunately, we cannot fix it easily. Hence, we will have to redo the paver installation by clearing the stone dust under the paver.

  1. Stone Dust issue causing uneven Paver Height

It often observes that most paver production unit use stone dust for the base preparation as a setting bed. Stone dust is a screening by-product that used for having some gravel pits. However, the main problem with stone dust is that it breaks into fine dust form when its installed under the paver. This dust holds a lot of water and can form a clay soil when it freezes.

Solution: The ideal way to make composite to have even compaction is by using ¾ processed gravel that has various size particles. However, there is no way to repair the existing uneven paver other than starting over the whole process.

  1. The Paver and Fixed edges are slowing disappears

You would have noticed that many pavers don’t have the correct edge and those are on the edge of breaking since no setting bed is available under the pavers.

Solution: A filter fabric usage under the base and bringing up the sides of project excavator will prevent this issue. Unlike the uneven paver heights, this issue can be fixed by the particular area without completely starting over. Filter fabric can be fixed for each paver and new base can be added for paver reinstallment.

  1. Paver Land is Settled

The main reason for a settled paver land is lack of compaction. This phenomena is often seen on a nearby site where house or pools are constructed. The backfilled soil are mostly not contacted when they filled. It is common that the ground under the paver dug up and not filled properly.

Solution: We are do following for fixing this issue.

  • Pull up the paver
  • Add more gravel base
  • Make sure that it compacted in intervals
  • When the base is properly filled, level with bedding sand
  • Now reinstall the paver.

    plastic mould for paver tiles
  1. The edge pavers are about to fall off

The main reason for this issues is that no edge restraints are installed to keep the pattern together.

Solution: There are 2 type of edge restraints are available in the market for paver installation. The most used type in indian land is PVC edging restraints that used during paver installation. It spiked into the base of the gravel where paver is installed. For fixing this settled issue, paver need to take out, more sand and base need to be filled with proper compaction and at the end an edge restraint need to be installed in order to rectify paver settle issue.

  1. Water is puddling on the paver.

There could be 2 reason for this issue.

  • The base may not be built at a proper pitch and may have build at a slightly low spot.
  • The base was not compacted well and the land settled over the time.

Solution: The only way to fix this issue is to pull up the paver area that settled and add more base and grave to compact the land before reinstalling the pavers.

  1. Uneven pavers and tipping.

The reason for this issue is that pavers are not installed with joint sand and that resulted into a setting bed.

Solution: When pavers are completely laid, the concrete sand or polymeric sand is poured into all joints. Next to that vibratory plate compactor should run over the pavers. More sand is required to top off the joints and project is compacted 2 or 3 times.

So the next time you find an unorganized pavers in a public space, at home surrounding or at factories, you might able to know the reason behind it and can even figure out the solution to it.

pvc paver moulds

Why JR?

AS already mentioned, JR rubber Industries is a company that leading the production of paver and paver block machine in india & around the globe. We started our paver mould manufacturing units in a place called Thrissur, India. We provide the complete solution for flooring industry with the manufacture and supply of moulds, supply of paver machinery, setting chemicals and color oxides and complete technical assistance for paver production with in plant trainings and onsite support. We are your one stop destination for all your paver production needs.

  • Our products are made with 100% plastic raw materials
  • The smooth inner layer transfers all the intricate designs to the tile and paver blocks
  • We provide the best in class lifespan
  • We have setting chemicals pigment and acrylic polish for start-up units
  • innovative and creative designs
  • It is easy to de-mould, compared to other polypropylene plastic mould
  • We have machines for paver blocks and tile production for overseas customers
  • We are the most reliable technical service and consultancy

Our services

JR rubber

Paver moulds stand out in the industry with matchless lifespan, quality and performance. Our rubber moulds are widely used around many parts of the world for casting perfect

Rubber paver mould tiles. The outer layer of a mould is the identical material of automobile tyres. As the moulds do not have a strong and healthy application like tyres, the lifespan of moulds is almost boundless.

JR Polypropylene Plastic Moulds

JR polypropylene plastic moulds are created using virgin plastic material which has a longer lifespan than any other polypropylene moulds available in the industry which are made from the reusable plastic material. They always keep a shape and very less prone to breakage.

Machines

We source the perfect machinery for our customers from the best manufacturers. We provide a wide range of production line – mini paver plant, semi-mechanized paver plant, fully automatic paver plant which are suitable for all kind of production capacities. The key machinery being used for this is vibro table or otherwise known as vibrofoming tables.

 

 

 

<>paver blocks in india

Please follow and like us:


Why we should use polypropylene plastic moulds over others?


Polypropylene sometimes referred to as pp mould is a thermoplastic “addition polymer” produced by blending propylene monomers. It is a synthetic resin used in a variety of applications to comprise packaging for consumer products, special devices like living hinges, plastic parts for various industries including the automotive industry and textiles. It became prominent extremely fast. Polypropylene has the ability to crystallize. Polypropylene is utilized in both household and industrial use. Its distinctive properties and capability to adapt to various fabrication techniques make it stand out as an invaluable material for a vast variety of uses. Another invaluable characteristic is polypropylene has the ability to function as both a plastic material and as fiber.

We, JR Rubber Industries, paver mould manufacturers use this safest and highly beneficial polypropylene plastic for our products. We have the complete solution for exterior flooring industry with the manufacture and supply of moulds, the supply of paver machinery, setting chemicals and colour oxides and complete technical assistance for paver production with in-plant training and onsite assistance for production. We are your one-stop destination for all your paver production needs. We have a wide range of products including Rubber Moulds for Pavers/Floor tiles/Kerbstone/Cover Blocks Polypropylene Plastic Moulds Pavers and other customized products, paver production line – Mini paver plant, Sem- mechanized paver plant, Fully automatic paver plant. We have our industry at Kerala the south Indian state. We have shipments worldwide direct from our production units in India. The use of safe and harmless elements for production makes our products more acceptable.

rubber paver mould manufacturers

Uses of polypropylene in different industries

The major end users of polypropylene are the packaging industry, electrical and equipment manufacturing, household appliances, automotive industries and construction materials. Relative to other common plastics polypropylene has a low density ranging between 0.895 and 0.92 g/cm which translates to weight savings for manufacturers and distributors of injection moulded polypropylene parts. It has extraordinary resistance at room temperature to organic solvents.  Polypropylene can be easily copolymerized (essentially combined into a composite plastic) with other polymers like polyethene. Copolymerization changes the material properties remarkably, allowing for more robust engineering applications that are possible with pure polypropylene. The ready availability and relatively less price make polypropylene a beneficial component for the mould.

Some of the most significant characteristics of polypropylene are:

1.Chemical Resistance: It is a good choice for containers of such liquids, such as cleaning agents, first-aid products since diluted bases and acids don’t react readily with polypropylene.

2.Elasticity and Toughness: Polypropylene will act with elasticity over a certain range of diversion, but it will also experience plastic distortion early on in the diversion process, so it is generally reviewed as a “tough” material. Toughness is defined as a material’s capacity to deform without breaking.

3. Fatigue Resistance: Even after a long torsion, bending and flexing polypropylene retains its shape. This property is especially beneficial for making living hinges.

4.Insulation: It is very useful for electronic components since polypropylene has a very high resistance to electricity

5.Transmissivity: Polypropylene is normally produced to be naturally opaque in colour although it can be made transparent. If a transfer of light is important and is of aesthetic value polypropylene can be used for these applications. Polycarbonate is better choices if high transmissivity is desired.

plastic mould for paver tiles

The Different Types of Polypropylene :

The main types of polypropylene available for production are homopolymers and copolymers. Among them, homopolymers are the most commonly used and general purpose moulds. The copolymers are further classified into block copolymers and random copolymers. Each type suits certain applications better than the others. Polypropylene is sometimes called the “steel” of the plastic industry because of the various ways in which it can be recast or customized to best serve a specific purpose. This is normally achieved by adopting special additives to it or by making it in a very particular way. This adaptability is an important attribute.

Properties of polypropylene

1.It has the melting temperature at 130°C

2. The typical injection mould temperature ranges between 32 – 66 °C

3. Heat Deflection Temperature (HDT) is maintained in 100 °C at 0.46 MPa

4. Have a Tensile Strength of 32 MPa

5. The flexural strength is kept at 41 MPa

6. Have specific gravity of 0.91

7. Shrink rate is 1.5 to 2.0%

The mentioned properties help in the efficient production of perfect plastic products. For the giving satisfactory result to our customers, we always opt the best of everything. And that is why we use polypropylene in our plastic products. We have different variants of plastic paver moulds including natural stone, zigzag, I shaped, hexagon and many others.

Why JR?

  • Our products are made with 100% plastic raw materials
  • The smooth inner layer transfers all the intricate designs to the tile and paver blocks
  • We provide the best in class lifespan
  • We have setting chemicals pigment and acrylic polish for start-up units
    innovative and creative designs
  • It is easy to de-mould, compared to other polypropylene plastic mould
  • We have machines for paver blocks and tile production for overseas customers
  • We are the most reliable technical service and consultancy

 

Our services

JR Rubber Moulds

JR rubber

paver moulds stand out in the industry with matchless lifespan, quality and performance. The important thing in casting the perfect pavers is the quality of products. Our rubber moulds are widely used around many parts of the world for casting perfect

rubber paver mould tiles. The outer layer of a mould is the identical material of automobile tyres. As the moulds do not have a strong and healthy application like tyres, the lifespan of moulds is almost boundless. For the glazing for pavers, moulds are made with a specialty rubber inner layer. They are resistant to alkaline and acid attacks. The particular attribute of rubber confirms that the moulds are in perfect shape even after long years of usage. The flexibility of rubber assures easy demoulding. They can be used for many years of production without distortion of shape and degradation which is very crucial when in moulds. With the JR Rubber moulds, you can create the pavers of your dreams with varying designs.

pvc paver moulds

JR Polypropylene Plastic Moulds

JR polypropylene plastic moulds are created using virgin plastic material which has a longer lifespan than any other polypropylene moulds available in the industry which are made from the reusable plastic material. They always keep a shape and very less prone to breakage. We also introduced the vibrating demoulding machine for easy demoulding which highly increase the lifespan of plastic moulds.

Machines

We source the perfect machinery for our customers from the best manufacturers. We are in association with the leading machinery manufacturers across the country. We provide a wide range of production line – mini paver plant, semi-mechanized paver plant, fully automatic paver plant which are suitable for all kind of production capacities. The key machinery being used for this is vibro table or otherwise known as vibro forming tables.

If you are in search for the prime quality products for your pavement or searching for a good and reliable paver production plant then JR Rubber Industries is the one-stop solution for all your pavement needs.

 

 

 

<>pp mould

Please follow and like us:


3 Types of Paver Plants that JR Rubbers Offer

Automatic Paver Plant

Paver productions was too hard and time-consuming in its early years. Paver production workers used to do all the production process manually without any machinery help. However, as innovation progresses, machines started to replace a lot of work that man used to do. From automating some part of paver production, Engineers developed paver plants that can do the whole process of its own by one switch. Our Engineers at JR Rubbers produce 3 kinds of Paver plants for the client as per their requirement. Following are the 2 types of Paver plant that JR Rubbers build for the customer.

These paver plants are built at the client location as per the requirement from customer. Mini Paver plant is for the smaller paver producing companies who need comparatively lesser paver needs. This plant is automated in the different department, however, need several manual interventions during the paver production time.

Semi-Mechanized Paver Plant is the semi-automated plant which apt for a medium paver producing company. Semi Paver plant needs lesser manual interventions during the paver production process compared to mini paver plant. This plant can produce the much better unit of pavers as the specifications are higher than a mini plant.

rubber paver mould manufacturers

Fully Automatic Paver Plant is the most effective paver plant that produced by JR Rubbers. This paver plant does whole paver production process automatically and no manual intervention needed for continuing the workflow. Due to its extensive features, automatic paver plant produce the higher amount of paver compare to other 2 types of paver plants.

Below are the pavers that these plants are capable of building.

MINI PAVER PLANT

Mini Paver plant is a paver/tile production with  multitasking specifications. It is a high-performance paver plant with the capacity of performing large variety of tasks in the field. This plant has the capacity to build various level or pavers with a production capability of 3500-4000 moulds during the normal 8-hour shift.

Mini paver plant is basically for the small paver units. This plant needs manual intervention quite sometime during the paver production. Considering the low purchase cost, mini paver plant is famous among the upcoming paver business units.

paver mould making machine

Mini Paver Plant

This machine consist of

  • 2 VIBRO TABLE,
  • Approximately 3000 holes drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the file size of 2 Ft* 2Ft with height 100mm
  • Capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber moulds
  • 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having the strength of 3 horsepower electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing machine with a capacity of 500 kg and 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

SEMI MECHANISED PAVER PLANT

Semi paver plant used for the production of paver or tile production. This machine can offer a high performance and can handle multiple tasks and it offer an option to produce different level of pavers pant with a capacity of 9000 to 10000 moulds/8 hour shift.

Semi Paver Plant is majorly required for medium sized paver units who can afford little better than mini paver plant. Semi paver plant is more powerful and efficient compared to its minor version.

automatic paving machine in kenya

                                                         Semi-Mechanised Paver Plant

This machine consist of

  • 2 VIBRO FORMING TABLE,
  • 3000 holes can drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the tile size of 2 Ft* 2Ft with height 100mm
  • A capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber
  • moulds and 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING consist of

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having a power of 3 HP electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing process with a capacity of 500 kg & 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres.
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

paver mould making machine
FULLY AUTOMATIC MACHINE

The fully automatic machine is an ultimate for business as it reduces manpower requirement and increases the efficiency by producing 25000 wet cast paver/day. Its automatic paver creation will refrain the duplication and waste of material handling which confirms the correct use of resources. This automatic paver plant introduced for the first time in the world by the most renowned manufacturer in India.

Fully automatic paver plant is the best paver producing plant JR Rubber produced as of now. This plant doesn’t require manual intervention and can produce the highest rate of pavers within a daytime. This is basically intended for the bigger paver manufacturing units.

Here are a few features of the fully automatic plant.

Vibrating Tables

JR rubbers being one of the best paver making company in the world is celebrating their silver jubilee in paver making field. Even after 25 years of experience, JR is standing on top and high in the paver manufacturing field. We have Mini, Semi, Fully automatic paver plant that offers an option to build different level of moulds with high quality and durability. All the moulds we created with utmost quality and have a guaranteed lifespan of 12 – 15 years. Here are some major points on why to choose JR for paver production.

  • The appearance of a non-static and anti-static inner layer
  • JR Rubbers deliver the finest quality of products in paver
  • There is no Paver shape deformation
  • There is no requirement to wash the molds, still, it will keep the shape.
  • Strength and durability are similar to automobile tyres
  • JR Products are made with 100% virgin raw materials
  • We provide innovative and creative designs for products with long lasting durability.

<>Automatic Paver Plant

Please follow and like us:


Complete Process Overview of Paver Productions

 

paver productions

Remember the old days when we used to play on the soil in front or at the backyard of our house? Things are changed for good and all houses and industries started applying pavers in their ground spaces. This helps to provide more beautiful and clean surrounding as well as restricting insects entering the home or factory premises.

Ever wonder how these pavers are made?

Ever give a thought of the existence of paver productions plant?

Probably your answer is NO unless you are working in the paver manufacturing company. Here we are going to brief you about JR Rubber Mould paver manufacturing process. Before we begin, let’s give you some information about our JR Rubber mould company.

JR Rubber Moulds is one of the leading paver producing company with an enormous experience of 25 successful years. By establishing the client base in 29 countries across the globe. We have started our journey by opening our first branch in Kerala, India and spread our wings and expertise in India, South Asia and African countries. We have provides supports in

  • African Countries – Kenya, Tanzania, Uganda, Rwanda, Zambia, Somalia, Malawi, Niger, Nigeria
  • Asian Countries- Bahrain, Oman extending to Lebanon and in Southeast Asia – Vietnam
    rubber paver mould manufacturers

we are pioneered in paver manufacturing by gaining the status of the most trusted name in the paver producing industry. Our range of products include

Since we know a bit about the JR company, we can jump into the paver production process.

Paver Production Process

Paver production starts by segregating the pre-requisites and this process requires below resources.

  • 2 Vibrating table
  • Concrete Miller
  • Color Mixer
  • Baby chips
  • Crusher dust sand
  • Cement
  • Chemical
  • Colour Oxides
  • Power around 15 HP
  • Paver Moulds
  • Plywood Sheets

JR Rubber moulds is even capable of providing automatic paver plants which don’t need a manual intervention for paver production. However, we will be concentrating here on different stages of paver creation for a deep insight.

  1. Paver mixer and Color Mixer making

The first phase is to create the mixer for paver using the concrete miller. The mixer is created by mixing the cement with crusher dust sand, baby chips and water. The normal ratio of this mixer is Cement – 50 KG, crusher – 100 KG, Baby chips -84 KG and water as per requirement. All these ingredients should be mixed well to form the flowing mixer with the thick consistency.

On the other hand, color mixing machine can use for mixing the color using color oxides along with chemicals. Chemicals are used for water reduction in pavers in order to provide the ultimate strength. Whereas color oxides are used for coloring the paver along with drying out the paver for long durability. Here are few details about the chemical we are using.

  SMF-Sulphonated Melamine Formaldehyde

SMF powder and Color Oxides are used in the paver production. SMF is a well-known superplasticizer used in paver production around the world. It is a high-end water reducer in order to provide the maximum durability to pavers. SMF powder widely used for all types in all types of grouts, mortars, coating and as a component of the concrete admixtures and emulsions. The usage ratio is 2-4 gram per 1 kg.

PCE- Poly Carboxylated Either

PCE is also a plasticizer that performs a quick setting of mixer and water reduction. PCE is in liquid form with a quantity distributed drums. The usage ratio is 3-5 gram per 1 kg.

color oxide in algeria

 Color Oxides

Color oxides are used for used for coloring the tiles as per request and to make tile attractive. Color oxides also attached with the chemical which works as the plasticizer. The quantity of color requires only a little amount, that is 2 gram per 100 kg. There are re different types of oxides such as

1, Red Oxide
2, Black Oxide
3, Yellow Oxide
4, White Oxide
5, Grey Oxide

 Acrylic Resin

Color oxides are mainly used for providing the necessary colors to the tiles, it will make the paving designs more attractive. There is also chemicals added in it will which make the paver harder for improving the lifespan.

  1. Paver making

As the paver mixer prepared in concrete miller and color mixer and chemicals prepared parallelly, major paver production action can perform now. The process starts with layering the paver mould by color mix and place it on first vibrator table. The forward vibrating table will lead the paver mould to next table where the mould will be filled with paver mixer created in concrete miller. Again the paver will push to the vibrating table where the paver will fill its quantity in equal proportion.  After completing the table round, paver will be placed above the plywood sheet for one day to cool and harden the paver. The next day paver will take out and spread under the sun to soak the full water.

The above-mentioned process is the standard procedure used for paver production. However, JR Rubber Moulds went a step ahead and owning 2 types of plant that reduce the manual interventions in paver productions. These paver production plants are mentioned below.

 Mini Paver Plant

Mini Paver plant is paver/tile production which has multitasking specifications. It is a high-performance paver plant with the capacity of performing a large variety of task in the field. This plant has the capability to build various level or pavers with a production capability of 3500-4000 moulds within a normal 8-hour shift.

paver mould making machine

 Semi Mechanised Paver Plant

Semi paver plant used for the paver and tile production. This machine can offer high performance and can handle multiple tasks at one time and it provides an option to produce different level of pavers with a capacity of 9000 to 10000 moulds/8 hour shift.

 Fully Automatic Paver Machine.

The fully automatic machine is a lifesaver for business as it reduces the need of manpower and increases the efficiency by producing 25000 wet cast paver/day. This automatic paver creation will prevent the duplication and waste of material handling which assure the right use of resources. This plant introduced for the first time in the world and JR  is the most renowned machinery manufacturer in India.

JR rubber moulds having an experience of 25 years and proved to be one of the best paver making company in the world. Even after 25 years of experience, JR is standing on top and high in the paver creation field. We have Mini, Semi, Fully automatic paver plant that provides an option to build the different level of moulds with high quality and durability. All the moulds we created with utmost quality and have a guaranteed lifespan of 12 to 15 years. Here are some major points why to choose JR for paver production.

  • Appearance of a non-static and anti-static inner layer
  • JR Rubber moulds deliver the finest quality of products in paver production
  • There is no shape deformation
  • There is no requirement to wash the molds, still it will keep the paver shape.
  • Strength and durability similar to automobile tyres
  • JR Products are made with 100% virgin raw materials
  • We provide innovative and creative designs for products with long lasting durability.

 

<>paver productions

Please follow and like us: