ADVISE FROM THE BEST PAVER MOULD MANUFACTURER

interlocking brick mould

Looking for a paver to help you with a job? Here are some things to you need to know before you find one. We can make sure that you end up hiring the right paver.

We are known over 28 other countries for the manufacturing of all kinds of tile moulds including interlocking brick mould and parking tile moulds.

We also provide you with a catalogue with a wide range of different paver block designs. We also provide our clients with multiple designs for floor tile moulds.

WHAT ARE PAVERS?

A paver is something that is commonly used as external flooring. They are usually made of concrete and is a brick-like piece. To make pavers, you mix concrete with some colouring agent and put it into a mould so it can be set and made into a certain shape.

interlocking brick mould

Pavers are mostly used for walkways and outdoor platforms which is why it is commonly known as external flooring. There are different types of pavers that are used in construction.

Pavers are not something that your guests would normally tend to notice. The designs of your pavers are not paid much attention to.  But, pavers do play a very important role in the setting of your house.

They are usually used outside residential houses or commercial buildings. Most people use pavers for their parking lots.

Pavers usually help as it avoids the chipping of the surface and it makes it smooth and safe for people to walk about. This is why pavers are mostly used.

HERE ARE SOME REASONS FOR YOU TO INSTALL PAVERS

  • Value of your home.

Many time, real estate agents have suggested that when compared to homes that have ordinary concrete driveways, people prefer paved driveways as they look much neater.

It also adds value as it is much smoother for people to walk through. They usually tend to prefer interlocking paves over any other.

paver mould making machine

 

  • Durable.

Pavements are a very durable way of going about your driveway as they are resistant and hence cost effective. They can withstand any weather and also in case an earthquake or an erosion takes place.

Especially with interlocking pavers, they avoid movement taking place and they also accommodate weight which makes them much better than any other type of paver.

  • Drainage.

The pavers generally tend to have gaps between them. Especially while using brick pavers, they provide good drainage during heavy rains and floods.

They seep in the water between the gaps and do not let water stay on the surface for long. If water stays on the surface, then that would attract mosquitoes too. It could also make your driveway slippery.  

color oxide in algeria

 

  • Benefits of a brick paver.

Pavers tend to beautify your driveway and adds that extra unnoticeable spark to your home/office.

Apart from the fact that it looks good, when you use brick pavers you can immediately run heavy machinery over it. So in a couple of days, you can drive over the pavers.

This is not possible when you use any paver other than brick paver.

  • Environmentally friendly.

The pavers are suggested to be an eco-friendly concept as when they drain in the water, beneficial bacteria remove unwanted toxins before they reach the beaches and the bay.

If you are using concrete or asphalt, rainwater tends to mix with various chemicals and with oil and goes into storm drains. In contrast to that, use the interlocking paving systems which will trap the oil and let the water seep out.  

rubber paver moulds

 

  • Easy to replace.

Driveways are easier to replace when they are constructed with pavers as if there is any damage, then only the required pavers need to be removed and replaced.

Replacing concrete and asphalt is much more difficult and when it is done, it might look bad. With pavers, you wouldn’t even know when the damaged one is removed and replaced.

With pavers, multiple colours, sizes, shapes, and textures are available. It provides you with an unlimited artistic style as you can create it however you want.

But it is important to keep in mind that the thickness of the pavers should be according to its usage.

Different requirements have different thickness of pavers. Compared to walkways, a driveway would require a different thickness altogether.

JR Rubber Industries are the pioneers in the industry of manufacturing moulds for pavers. We prioritize the quality of the products that we manufacture over everything else and hence we use the apt machines to manufacture the tiles.

With our longing experience in the field of paving equipment manufacturing, we have developed across the different trends and preference in paving ideas. We have always ensured to satisfy our customers by knowing what they need.

<>interlocking brick mould

Please follow and like us:
error


3 Types of Paver Plants that JR Rubbers Offer

Automatic Paver Plant

Paver productions was too hard and time-consuming in its early years. Paver production workers used to do all the production process manually without any machinery help. However, as innovation progresses, machines started to replace a lot of work that man used to do. From automating some part of paver production, Engineers developed paver plants that can do the whole process of its own by one switch. Our Engineers at JR Rubbers produce 3 kinds of Paver plants for the client as per their requirement. Following are the 2 types of Paver plant that JR Rubbers build for the customer.

These paver plants are built at the client location as per the requirement from customer. Mini Paver plant is for the smaller paver producing companies who need comparatively lesser paver needs. This plant is automated in the different department, however, need several manual interventions during the paver production time.

Semi-Mechanized Paver Plant is the semi-automated plant which apt for a medium paver producing company. Semi Paver plant needs lesser manual interventions during the paver production process compared to mini paver plant. This plant can produce the much better unit of pavers as the specifications are higher than a mini plant.

rubber paver mould manufacturers

Fully Automatic Paver Plant is the most effective paver plant that produced by JR Rubbers. This paver plant does whole paver production process automatically and no manual intervention needed for continuing the workflow. Due to its extensive features, automatic paver plant produce the higher amount of paver compare to other 2 types of paver plants.

Below are the pavers that these plants are capable of building.

MINI PAVER PLANT

Mini Paver plant is a paver/tile production with  multitasking specifications. It is a high-performance paver plant with the capacity of performing large variety of tasks in the field. This plant has the capacity to build various level or pavers with a production capability of 3500-4000 moulds during the normal 8-hour shift.

Mini paver plant is basically for the small paver units. This plant needs manual intervention quite sometime during the paver production. Considering the low purchase cost, mini paver plant is famous among the upcoming paver business units.

paver mould making machine

Mini Paver Plant

This machine consist of

  • 2 VIBRO TABLE,
  • Approximately 3000 holes drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the file size of 2 Ft* 2Ft with height 100mm
  • Capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber moulds
  • 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having the strength of 3 horsepower electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing machine with a capacity of 500 kg and 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

SEMI MECHANISED PAVER PLANT

Semi paver plant used for the production of paver or tile production. This machine can offer a high performance and can handle multiple tasks and it offer an option to produce different level of pavers pant with a capacity of 9000 to 10000 moulds/8 hour shift.

Semi Paver Plant is majorly required for medium sized paver units who can afford little better than mini paver plant. Semi paver plant is more powerful and efficient compared to its minor version.

automatic paving machine in kenya

                                                         Semi-Mechanised Paver Plant

This machine consist of

  • 2 VIBRO FORMING TABLE,
  • 3000 holes can drilled on an 8MM plate,
  • 1.5 horsepower 3 phase motor
  • 8mm thick top plate
  • 3 working table with a machine dimension of 10 Ft length * 2.75 widths * 2.96 Ft height.
  • Machine length of 26 Ft and the tile size of 2 Ft* 2Ft with height 100mm
  • A capacity of 3000 square feet per 8 hour shift for tiles with automatic movement of rubber
  • moulds and 2000 square feet per 8 hour shift for Interlock paving Blocks

PAN MIXER FOR COLOR MIXING consist of

  • A 150 km weighted Pan Mixer
  • Have a balancing capacity of 150kg batch with a volume of 200-litre capacity.
  • Having a power of 3 HP electric motors with a bottom plate of 10mm and 8mm plate at the sideline.
  • This machine has a dimension of 32” dia*depth 16”
  • Reduction gearbox system with a ratio of 40:1

HYDRAULIC TYPE GREY MIXER MACHINE WITH HYDRAULIC HOPPER

  • 500 km Hydraulic Muller type Grey Mixer machine.
  • Concrete mixing process with a capacity of 500 kg & 700-litre volume.
  • Feeder hopper with a capacity up to 400 litres.
  • 7.5 HP and 750 KG and have a diamond of 55” Dia, 16” depth.

paver mould making machine
FULLY AUTOMATIC MACHINE

The fully automatic machine is an ultimate for business as it reduces manpower requirement and increases the efficiency by producing 25000 wet cast paver/day. Its automatic paver creation will refrain the duplication and waste of material handling which confirms the correct use of resources. This automatic paver plant introduced for the first time in the world by the most renowned manufacturer in India.

Fully automatic paver plant is the best paver producing plant JR Rubber produced as of now. This plant doesn’t require manual intervention and can produce the highest rate of pavers within a daytime. This is basically intended for the bigger paver manufacturing units.

Here are a few features of the fully automatic plant.

Vibrating Tables

JR rubbers being one of the best paver making company in the world is celebrating their silver jubilee in paver making field. Even after 25 years of experience, JR is standing on top and high in the paver manufacturing field. We have Mini, Semi, Fully automatic paver plant that offers an option to build different level of moulds with high quality and durability. All the moulds we created with utmost quality and have a guaranteed lifespan of 12 – 15 years. Here are some major points on why to choose JR for paver production.

  • The appearance of a non-static and anti-static inner layer
  • JR Rubbers deliver the finest quality of products in paver
  • There is no Paver shape deformation
  • There is no requirement to wash the molds, still, it will keep the shape.
  • Strength and durability are similar to automobile tyres
  • JR Products are made with 100% virgin raw materials
  • We provide innovative and creative designs for products with long lasting durability.

<>Automatic Paver Plant

Please follow and like us:
error